[ Taking care of the stainless steel ]

Avoiding mechanical damages

Stainless steel plates should not be dragged nor placed on the other ones without the necessary protection. They should be separated and protected with wood blocks, paper or plastic, allowing their movement without mechanical damages to the surface.

The ones that are separate for posterior use must be kept away from the floor and isolated by planks.

Avoiding contamination

In order to handle the stainless steel, preferentially, use adapted accessory made of synthetic material. All the equipment and handling accessories have to be clean before using.

Materials of small thickness. Cold laminated materials present a better quality in their superficial finish, with inherent finish to the production process. The handling of this product requires the use of clean gloves, avoiding fingerprints. If that happens, the marks can be removed only with a soft organic solvent, and then it is necessary to clean with a lukewarm detergent solution. The stains removal finishes with a careful rinse made with clean water and material drying.